Reference Cells
应用领域：光伏太阳能研发生产
设备特性：这是光伏电池的参考测量照明水平在评估光伏器件的性能用辐射计。通过量化的光量达到了测试装置，它使太阳能电池和组件的光到光电转换性能进行测量和比较。 参考细胞是最常用的设置光源的强度，一个特定的测试条件（如一个太阳）的IV测量。Reference cells是最常用的在光源的强度，一个特定的测试条件（如一个太阳）的IV测量。参考单元包括一个坚固的外壳，太阳能电池，温度传感器和保护窗口。Reference cells include a rugged enclosure, solar cell, temperature sensor, and protective window. 细胞类型，温度传感器，并可以选择窗口材料，以满足您的要求。 Cell type, temperature sensor, and window material can be selected to meet your requirements. r
Reference Cells 标准太阳能电池
在太阳能电池分析测试过程中，通常采用标准太阳能电池来校准光源的绝对光照强度，从而计算出被测太阳能电池的光电转换效率，进而进行分析对比。
尤其是测试太阳能电池I—V特性时，通常采用标准太阳能电池对太阳模拟器的光照强度进行标定。
标准太阳能电池通常由封装外壳、太阳能电池、温度传感器和保护窗口等组成。其中，太阳能电池类型、温度传感器类型以及保护窗口的材料都是可以用户自己选择的，同时还可以提供对标准太阳能电池的校准数据。
常规特性
可露天使用（不适合长期室外使用）或者搭配太阳模拟器使用
2cm×2cm硅材料标准太阳能电池
太阳能电池与封装外壳之间具有良好的热接触
温度探测
四线输出
BK7玻璃窗口
窗口背面和太阳能电池表面镀宽光谱增透膜
安装孔符合WPVS标准太阳能电池设计要求
选配
GaAs标准太阳能电池，可测试GaAs和CdTe材料
自己提供太阳能电池进行标定
石英窗口代替BK7玻璃窗口，或者采用滤光片代替BK7玻璃窗口对特殊材料太阳能电池进行特定光谱响应测试，比如非晶硅太阳能电池
RTD温度传感器或者热电偶
导线连接器
定制其它尺寸标准太阳能电池，或者定制其它尺寸安装孔
Reference Cells 标准太阳电池
This photovoltaic reference cell is a radiometer used for measuring illumination levels when assessing the performance of photovoltaic devices. By quantifying the amount of light reaching a test device, it enables the light-to-electricity conversion performance of solar cells and modules to be measured and compared.
Reference cells are most commonly used to set the intensity of a light source to a particular test condition (e.g. one-sun) for I-V measurements.
Reference cells include a rugged enclosure, solar cell, temperature sensor, and protective window. Cell type, temperature sensor, and window material can be selected to meet your requirements.
We provide reference cells with calibration data.
Features of Most Common Configuration
?? May be used outside (not designed for continuous outdoor use) or with solar simulators
?? 2-cm by 2-cm square silicon solar cell
?? Close thermal contact between solar cell and enclosure
?? Temperature sensor
?? 4-wire contact to the solar cell
?? BK7 glass window
?? Broad-spectrum, low-reflectivity coating behind window and surrounding solar cell
?? Mounting hole pattern (62 mm X 62 mm) compatible with WPVS reference cell design
Options
?? GaAs solar cell (instead of silicon) for testing GaAs and CdTe devices
?? Customer-provided solar cell
?? Quartz window or colorglass filter for customizing spectral response to resemble that of a particular test material such as amorphous silicon (instead of BK7 glass)
?? RTD temperature sensor or alternative thermocouple type
?? Cable termination using your preferred connector
?? Different size solar cell or aperture placed over solar cell
Other options are available; please contact us to discuss your requirements.
